NCompass Advanced Retail: Routing and Planning

Version: NCompass v11.15+
Purpose: This guide explains how to configure and use Routing and Planning in NCompass Advanced Retail.
Contents
Introduction
Configuration
Google API Key
Routing Wizard
Engineer Settings
Changing Routing Settings
Automatic Text Messages
Routing & Planning
Automatic Routing Explanation
Access via Two Week Planner
Access via Scheduled Calls
Routing Options
Suggested Routes
Manually Route Calls
Move Calls from Other Engineers
Add Field Calls Ready to be Booked
Saving a Route
Additional Planning Tools
Flag Tags
Weight
Fleet Tracking
Planned Route vs Actual Route
Map GPS Location and Current Call
GPS History
Introduction
The Routing module helps optimise field calls into the most efficient order, reducing travel time and distance.
In the latest release, NCompass uses Google’s upgraded Routing API to improve routing accuracy and optimisation, including support for Northern Ireland and the Republic of Ireland.
The module can automatically organise and time calls, making it easier to notify customers of their estimated appointment window. It can also route calls automatically and, when used with the points-based system, lock an engineer’s day once travel time pushes them beyond their working hours. This adds protection against overbooking.
Configuration
Before using the Routing module in NCompass, complete the initial setup.
Google API Key
Follow the internal guide for setting up your Google API key:
Setting up Google API ... | Calculus Knowledge Base
Note: This may already be configured if you use NCompass Mobile or have previously used routing in NCompass.
Routing Wizard
Go to:
Tool > Licencing and Quick Configuration
On the Routing line, select Click for wizard.
Step 1: API Key
Enter the API key obtained in the previous step.
Click Save & Next >
Step 2: Engineer Timings and Locations
For each engineer you want to route, set:
Start Time (
HH:MM)
Start Postcode
Tick Enabled
Optional:
Highlight engineers you want to limit by working hours.
Enter the number of minutes worked for each day at the bottom of the window.
Click Update Selected
Note: You can edit these settings later for each engineer individually after completing the wizard.
Click Save & Next >
Step 3: Padding, Rounding, and PM Calls
Configure field call padding for the customer appointment window:
Start: Add this many minutes to the start of the call
End: Add this many minutes to the end of the call
Base Duration: Add this many minutes to the duration of the call
Configure rounding times:
Google’s Routing API may return exact times such as 9:57 AM. Use the rounding setting to round these times to your preferred option.
Configure afternoon calls to either:
Start immediately after the AM calls
Start after lunch, with a delay if needed
Click Save & Next >
Step 4: Automatic Routing
Recommended: Speak to the implementation team before enabling automatic routing.
Automatic routing will route every enabled engineer, on every day where a new call is booked or an existing call is amended.
Important: This may increase usage against your Google account if you exceed your monthly call allowance.
If you want to enable automatic routing:
Set NCompass automatically update routes to Yes
Choose a Default Standard Route:
Fastest (recommended)
Furthest Call First
Furthest Call Last
Set Finalize Route X Days Before to lock field calls from amendment and route calls on the configured day/time
Set Lock Field Calls After Routing if field calls should be locked once manual routing is completed
Click Finish
Engineer Settings
After completing the wizard, you can update engineer-level routing details.
Changing Routing Settings
Go to:
Salesperson & Engineers > Edit
Engineer tab
Update:
Default Start Time
Default Start Postcode
Routing tab
Update:
Total duration of working hours per day
Automatic Text Messages
To configure customer SMS notifications with estimated field call windows:
Go to:
Salesperson & Engineers > Edit
In the Engineer tab, configure:
Auto SMS Times Today
Sends messages to all customers with a mobile number for field calls booked for today.
Example: 
07:00 on the morning of the call.
Auto SMS Times Tomorrow
Sends messages to all customers with a mobile number for field calls booked for tomorrow.
Example: 
18:00 on the evening before the call.
Note: These settings must be configured for each engineer individually.
Routing & Planning
Automatic Routing Explanation
NCompass can automatically route each enabled engineer for every day they have calls booked, if this has been configured in the routing wizard.
Whenever an engineer’s diary changes, that engineer and date are added to a re-routing queue. Once processed, NCompass recalculates the total duration of the day.
If the new total exceeds the engineer’s working hours, NCompass prevents any further calls from being booked for that engineer on that date.
This allows estimated travel time to be considered when preventing overbooking.
Access via Two Week Planner
Go to:
Field Calls > Two Week Planner
Then:
Right-click the engineer and day you want to route
Access via Scheduled Calls
You can also access routing from Scheduled Calls:
Open Scheduled Calls from the Quick Links bar or the Field Calls menu
Select the Engineer and Date
Click Engineer >
Routing Options
Available options include:
Show engineer locations
Opens the live map showing engineer locations and booked calls.
Show Current Route
Opens the Route Planner in view-only mode.
Suggest Fastest Route
Opens the Route Planner with the optimum route.
Edit Current Route
Opens the Route Planner with editing tools.
Suggested Routes
Use the Suggest buttons on the right-hand side of the window to re-route calls using Google’s API.
Suggest Fastest Route
Optimises the calls in the order Google determines is best.
Suggest Other Route
Additional routing options:
Fastest Route Starting with Furthest Call
Makes the furthest call the first stop.
Fastest Route Starting with Selected Call
Highlight a call in the grid to make it the first stop.
Fastest Route Ending with Furthest Call
Makes the furthest call the final stop.
Fastest Route Ending with Selected Call
Highlight a call in the grid to make it the final stop.
Note: NCompass will use the system defaults (such as first call / last call) if these have already been set on the field calls.
Manually Route Calls
To manually re-order calls:
Use the grid at the bottom of the window
Click and drag calls into the order you want
A blue line shows where the call will be dropped
After reordering, click Update Map
NCompass will then calculate the estimated travel time and distance for your manual route.
Move Calls from Other Engineers
You can overlay field calls booked on the same day for other engineers.
To do this:
Tick Show calls booked for other engineer(s)
Optionally choose a group of engineers to display
Click Update Map
This shows purple pins on the map for calls booked to other engineers.
Click a pin to view:
Postcode
Weight of call
Who the call is booked for
Flag tags
Additional actions:
Click Field Call ... to open the full field call details
Click Book to this Engineer to move the call to the engineer currently being planned
The route will then refresh to include the newly added call.
Add Field Calls Ready to be Booked
You can also overlay sales that are in stock and ready for delivery booking.
To do this:
Tick Show sales ready for delivery to be booked
Click Update Map
This shows green pins on the map for calls ready to be booked.
Click a pin to view:
Postcode
Weight of call
Who the call is booked for
Flag tags
From v11.16 onwards, this planning information is displayed directly on the pin details.
Additional actions:
Click Field Call ... to open the full field call details
Click Book to this Engineer to assign the call to the engineer currently being planned
The route will then refresh to include the newly added call.
Saving a Route
Click Round Times & Save Route to save the route against the engineer/day and apply times to each call using the padding settings defined in the wizard.
Note: If configured, NCompass will lock the route at this point so no new calls can be booked.
Additional Planning Tools
Flag Tags
Flag tags can be configured against Skills so a character is displayed when a skill is assigned to an item on the field call.
This is useful for highlighting calls involving:
Large or heavy items
Specific installation types (for example built-in or gas)
Go to:
Administration > Item Groups and Engineer Skills
Then:
Click Edit on a skill
Enter a character in Flag Tag
Click Save
Example:
If a skill such as Large Item Delivery has a flag tag of L, any call containing an item with that skill will display L:
On the planning grid
On the map pinpoints
Weight
If van weight restriction is being used:
Pins display the weight of each call
The route planner displays:
Total weight for each booked call
Total van weight
If you want to enable this on your system, contact the Calculus Implementation Team.
Fleet Tracking
These features require NCompass Mobile.
If you want to learn more about the delivery app, contact the team for a demonstration.
Planned Route vs Actual Route
Use Route Plan Enquiry to compare planned distance and duration against actual travel distance and duration.
Go to:
Field Calls > Route Plan Enquiry
You can:
Apply filters for engineers and dates
Sort by any column, such as the largest time overrun
Click Show Route to overlay expected vs actual route on a map
Click Details to view more information for the selected row
Map GPS Location and Current Call
The Current Call feature shows where the engineer is and how long the current call marked as Travelling will take from their current position.
From the Scheduled Calls screen:
Click the engineer you want to review
Click Engineer >
Click Map GPS Location and Current Call...
A window will display:
The engineer’s current GPS location
The distance to the customer property
The estimated travel time
GPS History
NCompass stores GPS history for each engineer for each day they are using NCompass Mobile.
This lets you:
View routes taken throughout the day
Track engineers in real time while travelling
Go to:
Field Calls > Show GPS History
Then:
Click the engineer you want to view
Change the date or date range if needed (defaults to today)
Click Show Locations